So the way you slump is to put the fused glass product on a mold.
Remember it must fit the mold fairly well; so you must pick the mold from the very beginning and work your way towards now. The glass should be slightly bigger than the mold, so that when it slumps, it comes out to be about the size of the mold.
After you put the glass on a mold, you put the whole thing in a kiln, and heat it at 1300-1400 degrees F for as long as it takes for slumping to occur, usually within a couple of hours.
Here's one sample piece I made that takes on the shape of an ashtray by slumping:
![White Square Glass Ashtray](https://omiphoto.chtoen.com/glass-fusing/white-square-glass-ashtray.jpg)
Here's another piece which takes on the shape of a funny looking vase by slumping:
![Clear Glass Ashtray With Red Chinese Character](https://omiphoto.chtoen.com/glass-fusing/clear-glass-ashtray-with-red-chinese-character.jpg)
If you have any questions let me know and I will do my best to help you!
◀ Fuse Glasses In A KilnGlass Fusing Sandblast Design ▶